ISO 9001:2015 certifiedIAPMO SCBCert. 1117610

Contact sales@calpexplastics.com (760) 254-9162

Custom extrusion · Since 1980

How custom extrusion works, from your drawing to delivery.

Profiles, tubing, pipe and rods made to your print in more than 15 material families, with dies made in our own tool and die room in Oceanside, California. Here is each step, what we can run, and how to start a quote.

Request a quote Call (760) 254-9162

  • ISO 9001:2015
  • Since 1980
  • Made in Oceanside, CA
A natural plastic tube with a co-extruded red stripe leaving a generic steel die face.
FIG. 01 The die shapes the melt into your cross-section; here, a tube with a co-extruded stripe leaving a generic die face. Generic geometry.

What we make

Every family, made to your print.

Each family has its own page with specifications and examples. Every product we make stays within a 3 in maximum.

  • A generic black U-channel and a yellow T-slot track.

    Custom profiles

    Up to 3 in wide

    Bumpers, tracking and clips; dual durometer and T-slotted profiles.

  • Generic clear flexible tubing with a red co-extruded stripe and a black tube.

    Tubing

    OD 1/16–3 in

    Printing, co-extruded striping and dual-lumen tubing.

  • Generic white round pipe with a belled end and a gray square pipe.

    Pipe

    Ø 1/8–3 in

    Plain, chamfered or belled ends.

  • Generic black, natural and white solid rods, one with a red stripe.

    Rods

    Up to 3 in

    Co-extruded striping and coloring.

  • A generic black spiral wrap helix.

    Spiral wrap

    Ø 1/8–1 in

    For bundling and protecting wire and cable.

  • A generic amber-clear dual-lumen tube and a natural striped cord.

    Urethane extrusions

    Rod · profile · tubing

    Co-extruded striping and dual-lumen tubing.

  • A generic translucent blue retractile coil.

    Coils

    Range of diameters

    Plastic coils, including urethane.

  • An unlabeled graphite spool of natural 3D printing filament.

    3D printing filament

    PLA · ABS · PETG

    Made in the USA; ask about bulk filament.

How custom works

Six steps, one plant.

From your drawing to delivery, every step runs in Oceanside: design help, the die, the extrusion, finishing and shipping.

  1. Drawing

    Send your print with the RFQ: STEP, STP, IGES, IGS, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG or PNG, up to 50 MB per file.

  2. Design review

    Our engineers can help with the design before the die is made. Every RFQ is reviewed by an engineer.

  3. Die

    The die is made in our in-house tool and die room.

  4. Extrusion

    Raw material gets a 100% quality check. Then feed, melt, form, cool: one continuous part. First-article inspection is available on request.

  5. Finishing

    Stripes and second materials join at the die (co-extrusion). Printed, cut, coiled and belled after: see secondary operations.

  6. Delivery

    Packed, palletized and shipped from Oceanside. General lead time 4–6 weeks including shipping, quoted per project.

Capability matrix

Materials by product type.

Published pairs only. Ask about any other combination with your drawing: we extrude more than 15 material families, listed on the materials page.

14 materials · published pairs only

Materials by product type, as published on our product pages. An empty cell means not published, not “no”.
MaterialTubingPipeProfilesUrethaneFilament
ABSYesYesYes
CPVCYes
Cross-linked PEYesOn request
HDPEYesYes
LDPEYesYes
NylonYes
PE (polyethylene)Yes
PETGYesYes
PLAYes
PolycarbonateYes
Polypropylene (PP)YesYes
PolystyreneYes
PolyurethaneYesYesrod, profile, tubing
PVC / vinylYesflexible, rigidYesYes

Size envelope

3 in is the maximum for every product.

Published ranges, made to your print inside them. Spiral wrap runs from 1/8 to 1 in.

Size envelope · as published

Log scale · inches

Tubing OD
1/16–3 in
Pipe Ø
1/8–3 in
Profiles width
up to 3 in
Rods and other products
up to 3 in
Spiral wrap Ø
1/8–1 in
FIG. 02 Published diameter and width ranges on a log scaleRef. 2, source. Bars with a faded start publish only the maximum; the minimum is per drawing. The tubing range is outside diameter.

Secondary operations

Finished in the same plant.

Verified operations only. Details for each are on services provided.

  • Printing

    Markings printed along tubing and other extruded parts, so each length can be identified after it ships.

  • Cutting and tape application

    Parts cut to length, and tape applied, after extrusion.

  • Coiling

    Plastic extrusion coiling after the line. Coils are also one of our product families, in a range of diameters.

  • Tube belling

    Belled ends on tubing and pipe. Pipe can also have plain or chamfered ends.

  • Value-added fabrication

    Further fabrication on extruded parts. Describe what your part needs in your quote request.

  • Color matching

    Custom colors matched to your sample or a Pantone or RAL reference.

Quality

ISO 9001:2015 certified quality management system.

Calpex Plastics runs an ISO 9001:2015 certified quality management system, certified by IAPMO SCB (certificate 1117610), with 100% quality checks on raw material.Ref. 5, source

ISO 9001:2015 certificate

Standard
ISO 9001:2015
Certification body
IAPMO SCB (IAPMO Systems Certification Body), ANAB accredited
Certificate no.
1117610
Issued · expires
·
Full certificate details
Certified organization
Finova Capital Partners LLC dba Calpex Plastics
Site
2570 Jason Court, Oceanside, CA 92056, USA (single site)
Decision / re-issue
Scope
“Custom manufacturer of Plastic extrusions including Tubing, Pipes, Profiles, Rods, Spiral Wrap & Coils for Serving the automotive, medical, electronics, packaging, recreational vehicle, action sports, toy, water filtration, irrigation, building & construction & many other industries including 3D Printing.”

Download the certificate (PDF, 373 KB)

The certificate is shown exactly as issued by IAPMO SCB, including the entity name as printed on it.

Industries

Where our extrusions go.

A few of the industries we serve, with their own pages. The full list has every industry published on calpexplastics.com.

FAQ

Custom extrusion questions.

Is there a minimum order?

There is no published minimum. Tell us the quantity you need, and we will quote it. Blanket orders are available.

Which drawing files can I send?

Attach your drawing to the RFQ form. It takes common CAD and drawing formats, including STEP (STP), IGES (IGS), DWG, DXF and STL as well as PDF and JPG, and lists every accepted type; 50 MB per file is allowed.

What is your lead time?

Every project is quoted with its own lead time; 4–6 weeks with shipping is typical.

What sizes can you extrude?

3 in is the maximum for every product: tubing from 1/16 to 3 in outside diameter, pipe from 1/8 to 3 in and profiles up to 3 in wide. Spiral wrap is 1/8 to 1 in.

What tolerances can you hold?

Tolerances depend on the material and the geometry, so we quote them from your drawing. Put the tolerances you need on the print.

Which materials do you extrude?

More than 15 material families, including ABS, acrylic, HDPE, LDPE, polypropylene, nylon, PETG, flexible and rigid PVC, polyurethane, polycarbonate and polystyrene. The full list is on the materials page. Food-contact compliant resins are available, with documentation supplied on request.

Can your engineers help with the design?

Yes. Our engineers can help with the design before the die is made, and the die is made in our in-house tool and die room.

Request a quote

Send the print. We’ll quote the part.

Attach your drawing here, or email sales@calpexplastics.com. Short runs to high volume; blanket orders available.

Attach a drawing. Blanket orders available.

What happens next
  1. 01We confirm receipt by email.
  2. 02Our engineers review your drawing and contact you with design questions.
  3. 03You receive a quote. Lead times are quoted per project.

See our plant: the factory tour, 2:58

NDA on request

Name
File

Drop drawings here or , up to 50 MB each. Accepted files: STEP, STP, IGES, IGS, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG or PNG.: STEP, IGES, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG, PNG · 50 MB each

Quantity, material or anything else we should know.

ISO 9001:2015 · Since 1980 · Made in Oceanside, CA

Files go only to Calpex sales and engineering. See our Privacy policy.