FAQ · Custom extrusion orders
Frequently asked questions.
Short answers about drawings and file formats, order sizes, blanket orders and lead times, from the facts we publish. For anything else, call (760) 254-9162 or email sales@calpexplastics.com.
General
Ordering and quotes
How do I request a quote?
Send your drawing with the quote request form, email it to sales@calpexplastics.com, or call (760) 254-9162. Each file can be up to 50 MB.
What should I send with a quote request?
Your name, company, phone and email, your drawing files, and any additional information about the part.
Is there a minimum order quantity?
There is no published minimum. Tell us the quantity you need, and we will quote it.
Do you offer blanket orders?
Yes. Blanket orders are available. Mention it when you request a quote. Read how we make custom plastic extrusions.
How long does a quote take?
We confirm receipt of your request by email. Our quality policy sets an objective of RFQ to quote in 2 weeks or less. It is a target, not a guaranteed turnaround. See our quality objectives.
Design, drawings and sizes
Which drawing file formats can I send?
Attach your drawing to the RFQ form. It takes common CAD and drawing formats, including STEP (STP), IGES (IGS), DWG, DXF and STL as well as PDF and JPG, and lists every accepted type; 50 MB per file is allowed.
Can your engineers help with the design?
Yes. Design assistance from our engineers is available, from product development to manufacturing. Dies are made in our in-house tool and die room.
What is the largest part you can extrude?
3 in is the maximum for every product. Tubing runs from 1/16 to 3 in outside diameter (OD), pipe from 1/8 to 3 in diameter and profiles up to 3 in wide. Spiral wrap runs from 1/8 to 1 in.
What tolerances can you hold?
Tolerances depend on the material and the geometry, so we quote them from your drawing. Put the tolerances you need on the print.
Also answered
Materials
Which plastics do you extrude?
Our published list includes PVC, polyethylene (PE), HDPE, polycarbonate, PETG, PET, nylon, Noryl®, ABS, butyrate, high-density polypropylene (HDP), urethanes and vinyl, among others. Every published name is on our materials page.
Can you match a color?
Yes. Custom colors matched to your sample or a Pantone or RAL reference.
Can you supply food-contact compliant material?
Food-contact compliant resins available, with documentation supplied on request.
Which special properties can an extrusion have?
Depending on the material, an extrusion can be flexible or curved, conductive or flame retardant, frosted, thin gage, T-slotted, rated for high temperature, or dual durometer, with two hardnesses in one section. Food-contact compliant resins are also available.
Do you make extrusions for medical devices?
Yes. Custom plastic extrusions for medical devices and equipment, made to your print. See medical extrusions.
Quality and compliance
Is Calpex Plastics ISO 9001 certified?
Yes. Calpex Plastics runs an ISO 9001:2015 certified quality management system, certified by IAPMO SCB (certificate 1117610, issued January 3, 2026, expires January 2, 2029). See the certificate details.
Do you check incoming raw material?
Yes. We conduct 100% quality checks on our raw material.
What is your quality policy?
“Calpex Plastics and its employees are committed to meeting customer and legal requirements to achieve customer satisfaction. We will always strive to provide quality products on time and continually improve our Quality Management System.”
Read the full policy, mission, vision and values.
Shipping and lead times
What is your lead time?
Every quote carries the lead time for that project. As a guide, plan on 4–6 weeks with shipping.
What is your on-time delivery objective?
Our quality policy sets an on-time delivery objective of 90% or more. It is a target, not a reported result.
How long does a new die take?
Die lead time depends on the part. Ask for it with your quote request.
Where are your parts made?
Our plant is at 2570 Jason Ct., Oceanside, California. It is the single site named on our ISO 9001:2015 certificate.
About Calpex Plastics
How long has Calpex Plastics been in business?
Since 1980. We have made custom plastic extrusions in Oceanside, California, ever since. Read about Calpex Plastics.
Who do you work with?
OEMs and small businesses, in industries such as building and construction, toys, electronics, packaging, automotive, recreational vehicles, action sports, irrigation and water filtration. See all industries we serve.
Can I see the plant?
Yes. Watch the factory tour (2:58), filmed in our Oceanside plant, with captions and a full transcript.
How do I reach sales?
Call (760) 254-9162, email sales@calpexplastics.com or use the contact page.
Process
Custom extrusion
Tooling and die design
Do you make your own extrusion dies?
Yes. Extrusion dies are made by our own tool and die makers in our in-house tool and die room in Oceanside, California. Die development is in-house too.
Can one die run two materials?
Yes. In co-extrusion, co-extruded stripes and second materials join at the die, so two or more materials leave it as one part.
Co-extrusion
What is co-extrusion?
Co-extrusion runs two or more materials through one die at the same time, so they leave the die as a single part. The second material can add a color, such as a co-extruded stripe, or a different hardness, as in a dual durometer profile.
What does Calpex co-extrude?
Co-extruded stripes on tubing and rods, two-color urethane cord and dual durometer profiles. Since 1986 we have supplied urethane cord to surf leash makers across the United States, and in 1999 we developed a two-color surf leash cord made by co-extrusion.
Which materials can be co-extruded together?
It depends on the part. Send your drawing with the materials you have in mind, and we will confirm the combination with the quote.
What finishing can follow co-extrusion?
Stripes are added at the die. After extrusion we offer printing, cutting, coiling, tube belling, tape application and value-added fabrication. See services provided.
What do you need for a co-extrusion quote?
Your drawing, the quantity and the materials you have in mind. Attach your drawing to the RFQ form. It takes common CAD and drawing formats, including STEP (STP), IGES (IGS), DWG, DXF and STL as well as PDF and JPG, and lists every accepted type; 50 MB per file is allowed. Each project is quoted with its own lead time, typically 4–6 weeks with shipping.
Products
Tubing
What sizes of tubing do you extrude?
We extrude tubing from 1/16 to 3 in outside diameter (OD), made to your print. Wall thickness depends on the material and the geometry on your drawing.
Which materials can you use for tubing?
High- and low-density polyethylene (HDPE and LDPE), flexible and rigid vinyl, PETG, polyurethane, polycarbonate, polystyrene and nylon. Cross-linked polyethylene is available on request.
Can you add a stripe or printing to tubing?
Yes. We offer printing and co-extruded striping to mark or identify your tubing. Dual-lumen tubing is available in polyurethane, made to your drawing.
Pipe
What sizes of plastic pipe do you extrude?
We extrude pipe from 1/8 to 3 in diameter, in English or metric sizes, made to your print. Wall thickness can follow a pipe schedule or be a number on your drawing.
Which materials can you use for pipe?
ABS, PVC, CPVC, polypropylene, LDPE (low-density polyethylene) and HDPE (high-density polyethylene). The right one depends on the pressure, temperature and chemicals the pipe will see, and on stiffness, service life and budget.
Can you bell or chamfer the pipe ends?
Yes. Pipe ends can be plain, chamfered or belled. We offer pipe belling, so a belled end can take the next length of pipe.
Do you make square or shaped pipe?
Yes. Besides round pipe we extrude square, rectangular, hollow and custom shapes to your drawing.
What colors does pipe come in?
The resin sets the color range. White, gray and clear are standard, and other colors are matched to your sample or a Pantone or RAL reference.
Can you supply pipe for potable water, natural gas or fire sprinklers?
These uses need pipe made and marked to the standard your system requires. Tell us the application and the standard the pipe must meet, and we will confirm with the quote what we can supply.
Profiles
How wide can an extruded plastic profile be?
We extrude plastic profiles up to 3 in wide, made to your print. Height, wall and length come from your drawing.
Which materials do you extrude profiles in?
PVC (rigid or flexible), polypropylene, ABS, polyethylene, PETG, polycarbonate and acrylic, and polyurethane profiles through our urethane extrusions.
What kinds of profiles do you make?
Bumpers, tracking, clips, channels and T-slots, in many sizes and shapes. Options include flexible, curved, conductive, flame retardant, frosted, high-temperature, thin gage, T-slotted and dual durometer profiles.
Can a profile combine two materials?
Yes. Dual durometer profiles combine two materials of different hardness, and co-extrusion runs two or more materials through one die at the same time, so they leave it as one profile.
Rods
What sizes of plastic rod do you extrude?
Rod is made to your print in sizes up to 3 in. Send the diameter or shape you need; standard rod sizes can be quoted too.
Which materials can you use for rod?
Rod is made to your print in the materials we extrude, including urethane (polyurethane) rod. Name the material on your drawing, or ask our team to help you choose.
Can you add a stripe or a color to a rod?
Yes. We offer co-extruded striping and coloring. A stripe is a second material joined at the die, and custom colors are matched to your sample or a Pantone or RAL reference.
How is plastic rod extruded?
Melted plastic is pushed through a steel die, and the die opening gives the rod its diameter and shape. A single-material rod uses one plastic; a co-extruded rod joins two or more plastics inside the die, which is how a stripe or layer of a second material ends up in the rod.
Spiral wrap
What is spiral wrap used for?
Mostly for cable bundling. Spiral wrap holds a group of wires, cables, hoses or small pipes together as one run and adds a plastic layer that takes the wear instead of the jackets. You will find it behind home entertainment systems, under office desks, on factory machines and in wire harnesses.
How should spiral wrap be applied?
Start at one end of the bundle and wind the wrap around it, coil by coil, until the run is covered. No tape or glue is involved. To add or remove a line later, unwind the section you need and wind it back on.
What spiral wrap sizes do you make?
Diameters from 1/8 to 1 in, each in a choice of pitch widths. Use the small end for fine instrument wiring and the large end for thick power or data bundles. Ask about standard sizes.
What colors does spiral wrap come in?
Many. Black and natural white are shown on this page, and we can match a color to your sample or to a Pantone or RAL reference.
Which industries use your spiral wrap?
Aerospace, computers and electronics, construction, industrial plants and manufacturing, medical, military and defense, plumbing, residential and telecommunications buyers all order it.
How do I order spiral wrap?
Send a quote request with the diameter, pitch width, color and quantity, or call (760) 254-9162. Every order is quoted with its own lead time, 4–6 weeks with shipping is typical, and blanket orders are available for repeat use.
What is your spiral wrap made of?
A durable extruded plastic. Tell us the resin you need, or ask with your quote.
Urethane extrusions
What do you extrude in urethane?
Mainly rod, profiles and tubing. We also run urethane pipe and coiled urethane in many diameters. Every part is made to your drawing, up to 3 in.
Do you make dual-lumen urethane tubing?
Yes. Dual-lumen tubing is one extruded tube with two separate channels, so two lines run side by side in a single jacket. We make it in polyurethane, to your drawing.
Why choose polyurethane for an extrusion?
It resists wear, flexes without cracking and absorbs impact. Customers use our urethane parts in medical devices and equipment, in automotive work and in agriculture. For a medical part, tell us the material grade you need (for example USP Class VI or ISO 10993).
Can urethane extrusions be striped or two-colored?
Yes, by co-extrusion: a second color is joined in the die as a stripe. We designed a two-color urethane surf leash cord this way in 1999, and we have made urethane leash cord for US surf leash makers since 1986. For other co-extruded parts, send your drawing with the materials you have in mind.
Do you make urethane coils?
Yes, in many diameters, from slim coils for light loads to heavy coils for tougher work. Other coil materials on request.
Do you make polyurethane plastic wrap?
Our urethane line is extruded shapes: rod, profiles, tubing and coils. If you need a wrap to bundle and protect cables or hoses, our plastic spiral wrap does that job, from 1/8 to 1 in. Send us a sample or a description and we will tell you what we can make.
Which polyurethane grades do you extrude?
Put the grade or hardness on your drawing, and we will confirm it with the quote.
3D printing filament
Which 3D printing filaments do you make?
Three: PLA filament, ABS filament and PETG filament, all made in the USA.
Which filament should I choose?
PLA for first prints, display models and quick prototypes. PETG when a part has to flex a little or take a knock. ABS when it has to cope with heat and rough handling, as long as you can give it a heated bed and good ventilation.
Does PLA filament need a heated bed?
No, it is optional. PLA prints at lower temperatures than ABS and seldom lifts at the corners, so many printers run it on an unheated bed; a little bed heat can still help the first layer stick.
What should I know before printing ABS?
It runs hot and shrinks as it cools, which can lift corners. Use a heated bed, keep drafts away (an enclosure helps) and print where the fumes can vent. In return you get tough, heat-tolerant parts.
Is PETG filament hard to print?
Not usually. It needs more heat than PLA but less than ABS, warps little and has only a mild smell, which is why it is a popular step up for functional parts.
Can I order filament in bulk?
Yes. Send a quote request with the type, color and quantity, or reach our sales team at (760) 254-9162 or sales@calpexplastics.com. Ask the same team about single spools and small quantities.
What filament diameters are available?
Ask our sales team which diameters and spool sizes are available now.
Materials
ABS
What do you extrude in ABS?
ABS profiles up to 3 in wide and ABS pipe from 1/8 to 3 in diameter, made to your print. We also make ABS 3D printing filament.
Can you extrude ABS rod or tubing?
Ask us. Send your drawing for ABS rod or ABS tubing with a quote request, and we will confirm it with the quote.
Why choose ABS for a profile?
It is light, it stands up to impact, and it resists corrosion and weathering. Those properties are why automotive manufacturers use ABS.
Do you make ABS filament?
Yes. Our ABS 3D printing filament is made in the USA, alongside PLA and PETG. See 3D printing filament.
Polyethylene
Which polyethylene grades do you extrude?
Polyethylene (PE), low-density polyethylene (LDPE) and high-density polyethylene (HDPE), all on our published materials list. Cross-linked polyethylene is available on request; ask with your drawing.
What is the difference between HDPE and LDPE?
HDPE is sturdy and durable, so it suits high-impact uses, and HDPE pipe offers good temperature resistance. LDPE is flexible, which suits pneumatic tubing, sprinklers and drip irrigation.
What can you extrude in polyethylene?
Tubing in HDPE or LDPE from 1/16 to 3 in outside diameter, pipe in HDPE or LDPE from 1/8 to 3 in diameter, and PE profiles up to 3 in wide, all made to your print.
PVC
Do you extrude rigid and flexible PVC?
Yes. We extrude rigid and flexible vinyl tubing, PVC profiles, and PVC and CPVC pipe, all made to your print in Oceanside, California.
Is vinyl the same as PVC?
Yes. Vinyl is the common name for PVC (polyvinyl chloride), so our flexible and rigid vinyl tubing is flexible and rigid PVC. Our materials list publishes PVC, PVC Rigid, PVC Flexible and Vinyl.
When is CPVC the better choice?
CPVC (chlorinated PVC) carries higher temperature ratings than PVC, so it is the option for pipe that runs hot. We extrude CPVC pipe from 1/8 to 3 in.
Can you supply PVC for food contact?
Food-contact compliant resins are available, with documentation supplied on request. Name the use on your drawing, for example food or chemical processing, and we will confirm a suitable PVC grade with the quote.
Industries
Aerospace & defense
Do you serve aerospace and defense customers?
Aerospace, defense industry, military and government are all on our published list of industries served. We make custom extrusions and spiral wrap to the customer’s print.
Automotive & transportation
Do you make automotive plastic extrusions to print?
Yes. We extrude profiles up to 3 in wide, tubing from 1/16 to 3 in outside diameter, pipe from 1/8 to 3 in and plastic rod, each made to the customer’s drawing. Automotive and auto/truck/transportation are both on our published list of industries served.
Which material is used for automotive fuel-line tubing?
Nylon tubing: it is heat and crack resistant, handles pneumatic applications and is widely used for automotive fuel lines. Put the material grade and any specification on your drawing, and we will quote it.
Building & construction
Do you supply plastic rod for construction?
Yes. Plastic rod is used in construction for beams and columns because it is lightweight, and in window channels. We extrude plastic rod up to 3 in, in one material or co-extruded, to your print.
Do you make PVC profiles for commercial construction and architectural applications?
Yes. We extrude custom PVC profiles up to 3 in wide, made to your drawing, and profiles in polypropylene, ABS and polyethylene. Building and construction and architecture are both on our published list of industries served.
Can construction profiles be flame retardant?
Flame retardant is one of the published options for our profiles, alongside conductive, curved, dual durometer, flexible, frosted, high-temperature, thin gauge and T-slotted. Tell us the flame rating your part needs, and we will match the material.
Do you make pipe for plumbing and drainage?
We extrude plastic pipe from 1/8 to 3 in in PVC, HDPE, LDPE, CPVC and ABS, with plain, chamfered or belled ends. Published uses include plumbing, wastewater and drainage.
Medical devices
Do you offer medical-grade materials?
Tell us the material grade your part needs, for example USP Class VI or ISO 10993, with your drawing. We will confirm a suitable material with the quote.
Can your extrusions be used in implants?
Contact us to discuss your implant application and its requirements.
Water filtration & irrigation
Do you supply tubing to the agriculture and irrigation equipment industry?
Yes. We extrude nylon irrigation tubing and polyethylene tubing to your print, and LDPE pipe for drip irrigation systems and sprinklers. Agriculture and farming is on our published list of industries served.
Still have a question?
Send the print. We’ll answer with a quote.
STEP, STP, IGES, IGS, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG or PNG, up to 50 MB per file.
- ISO 9001:2015
- Since 1980
- Made in Oceanside, CA