Applications
Where our aerospace and defense extrusions are used.
Spiral wrap, co-extruded parts, profiles, tubing and rod, each made to your drawing and specification.

Spiral wrap for wire and cable
Aerospace and military and defense are published industries for our spiral wrap, which bundles wires into a clean, protected harness, from 1/8 to 1 in diameter.
Co-extruded parts
Co-extrusion gives aerospace parts options for strength and flexibility. Published uses include weatherproofing and electrical components.
Custom profiles
Profiles up to 3 in wide, made to your print, with published options such as flame retardant, conductive, high-temperature and dual durometer.
Tubing for hydraulic and pneumatic systems
Hydraulic and pneumatic systems are a published application of our tubing. Nylon handles pneumatic applications, and flexible LDPE suits pneumatic lines.
Plastic rod
Rod made to your print, in one material or co-extruded, chosen where weathering resistance, low friction and high tensile strength count.
Made under ISO 9001:2015
Our quality management system is certified to ISO 9001:2015 by IAPMO SCB for our single site in Oceanside, with 100% quality checks on raw material.
Recommended materials
Resins for aerospace and defense parts.
The resin families we extrude for this work, what we make from each and why it is used.
| Material | We extrude it as | Why it is used, as published |
|---|---|---|
| Nylon | Tubing | Heat and crack resistant; handles pneumatic applications. |
| LDPE | Tubing, pipe | Flexible, for pneumatic lines. |
| PVC (rigid and flexible vinyl) | Profiles, tubing, pipe | Strong and durable; resists corrosion and weathering. |
| ABS | Profiles, pipe | Lightweight and impact resistant; resists corrosion and weathering. |
| Polyurethane | Tubing, rod, profile | Abrasion resistance, flexibility and impact resistance. |
Capabilities
Made, finished and tooled in one plant.
-
In-house tool & die
Extrusion dies are made by our own tool and die makers, and die development is in-house too.
-
Design assistance
Our engineers can help with the design before the die is made.
-
Co-extrusion
Two or more materials pass through one die at the same time and leave as a single part: co-extruded stripes, two-color cord and dual durometer profiles.
-
Striping
A co-extruded stripe on tubing or rods, added at the die, to mark or identify your part.
-
Printing
Markings printed along tubing and other extruded parts, so each length can be identified after it ships.
-
Cutting and tape application
Parts cut to length, and tape applied, after extrusion.