ISO 9001:2015 certifiedIAPMO SCBCert. 1117610

Contact sales@calpexplastics.com (760) 254-9162

Urethane · rod · profile · tubing Updated ISO 9001:2015 · Since 1980

Urethane Extrusions

Calpex Plastics runs custom urethane extrusion in Oceanside, California: extruded polyurethane rod, profiles and tubing, made to your drawing, with dual-lumen tubing and co-extruded stripes when the part needs them.

Choose polyurethane when a part has to bend and recover, resist wear and soak up knocks. Our extruded urethane goes into medical devices and equipment, automotive and agricultural parts, and since 1986 into the cord that surf leash makers use.

The cut end of a red extruded profile with a hollow teardrop-shaped bulb and a slotted lip.

Urethane extrusion, six ways

Products we offer

Rod, profile and tubing are the core of our polyurethane extrusion work. Each card below links to the product page with sizes and options.

  • Plastic Rod Extrusion

    Solid urethane rod and cord, round or shaped, in the diameter on your print. A co-extruded stripe can run its full length. Learn more about rods

    Urethane rod

  • Plastic Tubing Extrusion

    Flexible polyurethane tubing, including dual-lumen tubing: a single extruded tube with two separate channels inside. Learn more about tubing

    Dual-lumen tubing

  • Plastic Extrusion Profiles

    Polyurethane extruded profiles cut to your cross-section, such as bumpers, tracks and clips that need some give. Learn more about profiles

    Custom urethane profiles

  • Plastic Pipe Extrusion

    Pipe in urethane and in other plastics, in a range of sizes and shapes, with belled ends when the joint calls for it. Learn more about pipe

    Pipe and belling

  • Spiral Wrap Extrusion

    Looking for a polyurethane plastic wrap to bundle cables or hoses? The product we make for that job is plastic spiral wrap, 1/8 to 1 in, in many colors; ask us about the resin. Learn more about spiral wrap

    Ø 1/8–1 in

  • Plastic Coils Extrusion

    Coiled urethane in many diameters, from slim coils for light loads to heavy coils for tougher work. About coils

    Many diameters

The material

Why polyurethane?

Polyurethane, often shortened to urethane, sits between rubber and rigid plastic. It is the material this page is about, and the chips link to each form we make in it.

Wear
Stands up to abrasion where a part rubs, slides or is dragged.
Flex
Bends and springs back, which suits cords, coils and flexible lines.
Impact
Absorbs knocks that would crack a more rigid plastic.
Two colors
A stripe or a second material can be joined in the die by co-extrusion; see co-extrusion.

Our urethane record

Calpex Plastics is the perfect choice for your next project

Urethane has been part of our work for decades, and our dies are made in our own tool room. Here is that history, and what happens when you send a new drawing.

  1. Founded

    Calpex Plastics opens as a custom plastic extrusion shop in Southern California.

  2. Leash cord

    We start supplying urethane cord to surf leash makers around the United States.

  3. Two colors

    Our team designs a two-color urethane leash cord, run by co-extrusion.

  4. Your part

    Send the print; we cut the die in house and extrude the part in Oceanside under an ISO 9001:2015 certified system.

  5. Delivery

    Each project gets its own quoted lead time, typically 4–6 weeks with shipping; blanket orders are available.

What do you extrude in urethane?

Mainly rod, profiles and tubing. We also run urethane pipe and coiled urethane in many diameters. Every part is made to your drawing, up to 3 in.

Do you make dual-lumen urethane tubing?

Yes. Dual-lumen tubing is one extruded tube with two separate channels, so two lines run side by side in a single jacket. We make it in polyurethane, to your drawing.

Why choose polyurethane for an extrusion?

It resists wear, flexes without cracking and absorbs impact. Customers use our urethane parts in medical devices and equipment, in automotive work and in agriculture. For a medical part, tell us the material grade you need (for example USP Class VI or ISO 10993).

Can urethane extrusions be striped or two-colored?

Yes, by co-extrusion: a second color is joined in the die as a stripe. We designed a two-color urethane surf leash cord this way in 1999, and we have made urethane leash cord for US surf leash makers since 1986. For other co-extruded parts, send your drawing with the materials you have in mind.

Do you make urethane coils?

Yes, in many diameters, from slim coils for light loads to heavy coils for tougher work. Other coil materials on request.

Do you make polyurethane plastic wrap?

Our urethane line is extruded shapes: rod, profiles, tubing and coils. If you need a wrap to bundle and protect cables or hoses, our plastic spiral wrap does that job, from 1/8 to 1 in. Send us a sample or a description and we will tell you what we can make.

How long does a urethane extrusion order take?

Each project is quoted with its own lead time; 4–6 weeks with shipping is typical. Blanket orders are available.

Which polyurethane grades do you extrude?

Put the grade or hardness on your drawing, and we will confirm it with the quote.

Request a quote

Send the print. We’ll quote the part.

Attach your drawing here, or email sales@calpexplastics.com. Short runs to high volume; blanket orders available.

Attach a drawing. Blanket orders available.

What happens next
  1. 01We confirm receipt by email.
  2. 02Our engineers review your drawing and contact you with design questions.
  3. 03You receive a quote. Lead times are quoted per project.

See our plant: the factory tour, 2:58

NDA on request

Name
File

Drop drawings here or , up to 50 MB each. Accepted files: STEP, STP, IGES, IGS, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG or PNG.: STEP, IGES, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG, PNG · 50 MB each

Quantity, material or anything else we should know.

ISO 9001:2015 · Since 1980 · Made in Oceanside, CA

Files go only to Calpex sales and engineering. See our Privacy policy.