ISO 9001:2015 certifiedIAPMO SCBCert. 1117610

Contact sales@calpexplastics.com (760) 254-9162

Industries · Medical devicesISO 9001:2015 · Since 1980

Plastic extrusions for medical devices.

Custom plastic extrusions for medical devices and equipment, made to your print. Calpex Plastics extrudes tubing, including polyurethane dual-lumen tubing, plastic rod and profiles for medical device and equipment makers in Oceanside, California.

Medical, medical devices, dental and research are on our published list of industries served.

At a glance

Products
Tubing · dual-lumen tubing · rod · profiles
Tubing
OD 1/16–3 in
Materials
Polyurethane · acrylic
Quality
ISO 9001:2015 · IAPMO SCB

Applications

Where our medical extrusions are used.

Tubing, rod and urethane extrusions for medical devices and equipment, each made to your drawing.

  • Dual-lumen tubing

    Polyurethane dual-lumen tubing is one of our specialties, and medical device makers are among its users.

  • Tubing for laboratory and medical equipment

    Laboratory and medical equipment is a published application of our tubing, made to your print from 1/16 to 3 in outside diameter.

  • Acrylic tubing

    Acrylic tubing resists chemicals and breakage and can be anywhere from opaque to nearly clear, so what flows inside can be seen. That combination makes it common in medical settings.

  • Plastic rod for devices and equipment

    Plastic rods are used in medical devices and equipment, and they resist corrosion and chemicals. Rod is made to your print, up to 3 in.

  • Urethane extrusions

    Urethane suits medical applications that need abrasion resistance, flexibility and impact resistance. We extrude urethane rod, profile and tubing.

  • Striping and printing

    A co-extruded stripe added at the die, or printing on the part, marks or identifies an extrusion.

Recommended materials

Resins for medical device parts.

The resin families with a published medical use, what we make from each and why it is used. Need a specific grade, for example USP Class VI or ISO 10993? Tell us with your drawing.

Typical properties of each resin family, as published on our product pages. The grade for your part is set by your drawing and application.
MaterialWe extrude it asWhy it is used, as published
PolyurethaneTubing (incl. dual-lumen), rod, profileAbrasion resistance, flexibility and impact resistance; dual-lumen tubing is used in medical device production.
AcrylicTubingResists chemicals and breakage; opaque to nearly transparent; common in medical settings.

All materials we extrude

Capabilities

Made, finished and tooled in one plant.

  • Striping

    A co-extruded stripe on tubing or rods, added at the die, to mark or identify your part.

  • Printing

    Markings printed along tubing and other extruded parts, so each length can be identified after it ships.

  • Cutting and tape application

    Parts cut to length, and tape applied, after extrusion.

  • Color matching

    Custom colors matched to your sample or a Pantone or RAL reference.

Do you make extrusions for medical devices?

Yes: custom plastic extrusions for medical devices and equipment, made to your print. Products include tubing, polyurethane dual-lumen tubing, plastic rod and profiles.

Which quality system do you work under?

We work under an ISO 9001:2015 certified quality management system, certified by IAPMO SCB (certificate 1117610, valid to 2029-01-02). Tell us your medical quality-system requirements, including any special handling or production environment your part needs.

What sizes and quantities can you make?

Tubing from 1/16 to 3 in outside diameter, and rod and profiles up to 3 in. Each project is quoted with its own lead time, typically 4–6 weeks with shipping.

Do you offer medical-grade materials?

Tell us the material grade your part needs, for example USP Class VI or ISO 10993, with your drawing. We will confirm a suitable material with the quote.

Can your extrusions be used in implants?

Contact us to discuss your implant application and its requirements.

Can you work from our drawing?

Yes. Every part is made to your print. Send STEP, IGES, DWG, DXF, STL, IronCAD (ICD, ICS), SolidWorks (SLDPRT, SLDDRW, SLDDRT), PDF or JPG/JPEG files with a quote request. Our engineers can help with the design before the die is made.

Request a quote

Send the print. We’ll quote the part.

Attach your drawing here, or email sales@calpexplastics.com. Short runs to high volume; blanket orders available.

Attach a drawing. Blanket orders available.

What happens next
  1. 01We confirm receipt by email.
  2. 02Our engineers review your drawing and contact you with design questions.
  3. 03You receive a quote. Lead times are quoted per project.

See our plant: the factory tour, 2:58

NDA on request

Name
File

Drop drawings here or , up to 50 MB each. Accepted files: STEP, STP, IGES, IGS, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG or PNG.: STEP, IGES, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG, PNG · 50 MB each

Quantity, material or anything else we should know.

ISO 9001:2015 · Since 1980 · Made in Oceanside, CA

Files go only to Calpex sales and engineering. See our Privacy policy.