Applications
Where construction extrusions are used.
Profiles, channels, pipe, rod, tubing and spiral wrap for building and construction, each made to your drawing.
PVC profiles
In construction, extruded profiles go into window frames, door frames and roofing, where resistance to corrosion and weather matters.
Plastic rod for construction
Light weight makes plastic rod a fit for structural parts in construction, such as beams and columns, and for commercial parts such as window channels and machine guards.
Channels and tracks
Channels and other plastic profiles can be T-slotted, flexible, dual durometer or flame retardant, up to 3 in wide.
Pipe for plumbing and drainage
Plastic pipe serves plumbing, wastewater and drainage. HDPE pipe suits drainage systems, and CPVC carries higher temperature ratings than PVC.
Vinyl tubing
Vinyl tubing suits construction because it does not conduct electricity and does not corrode.
Spiral wrap
Construction is one of the published industries for our spiral wrap, which bundles and protects wires and cables, from 1/8 to 1 in diameter.
Recommended materials
Resins for construction parts.
The resin families we extrude for building and construction, what we make from each and why it is used.
| Material | We extrude it as | Why it is used, as published |
|---|---|---|
| PVC (rigid and flexible vinyl) | Profiles, pipe, tubing | Strong and durable; resists corrosion and weathering, for outdoor applications. Vinyl tubing does not conduct electricity. |
| CPVC | Pipe | As PVC, with higher temperature ratings. |
| HDPE | Pipe, tubing | Good temperature resistance; suits drainage systems and structures. |
| ABS | Pipe, profiles | Holds its dimensions and resists creep and chemicals. |
| Polypropylene | Profiles | Strong and durable; resists corrosion and weathering. |
Capabilities
Made, finished and tooled in one plant.
-
In-house tool & die
Extrusion dies are made by our own tool and die makers, and die development is in-house too.
-
Design assistance
Our engineers can help with the design before the die is made.
-
Color matching
Custom colors matched to your sample or a Pantone or RAL reference.
-
Cutting and tape application
Parts cut to length, and tape applied, after extrusion.
-
Tube belling
Belled ends on tubing and pipe. Pipe can also have plain or chamfered ends.
-
Co-extrusion
Two or more materials pass through one die at the same time and leave as a single part: co-extruded stripes, two-color cord and dual durometer profiles.