Plastic extrusion company · Oceanside, CAPlastic extrusion company · Since 1980
Manufacturer of Plastic Extrusions Including Tubing, Pipes, & More
Custom plastic extrusions made to your print: profiles up to 3 in wide, tubing from 1/16 to 3 in outside diameter, pipe from 1/8 to 3 in, in 15+ material families. Dies made in our in-house tool & die room in Oceanside, California.
Custom profiles, tubing, pipe and rods in 15+ material families. Dies made in-house.

Calpex Plastics at a glance
- SinceRef. 1, source
- 1980
- Tubing ODRef. 2, source
- 1/16 – 3 in
- Pipe dia.Ref. 2, source
- 1/8 – 3 in
- ProfilesRef. 2, source
- ≤ 3 in wide
- MaterialsRef. 3, source
- 15+ families
Calpex Plastics · Oceanside, CA
Custom Extrusions since 1980
One plant in Oceanside, California, has been turning customer drawings into extruded parts for more than four decades: one die, one material and one print at a time, or a whole family of parts.Customer drawings turned into extruded parts in Oceanside for more than four decades.
Calpex Services
We can handle
-
Small Jobs
Short runs are welcome.
-
High Volume
Production runs, with blanket orders if you need them.
-
Tight Tolerance
Your drawing sets the dimensions and tolerances, and we quote to them.
-
In-house Tool & Die
Dies designed and cut by our own tool and die makers.
-
Request a Quote
Reach out to our team here and we will respond to your inquiry shortly. Request a Quote today
-
Design Assistance
Learn more about how our experts can assist you with begining the extrusion process. Learn more about our design assistance
-
About Calpex Plastics
Since 1980, Calpex has been providing high quality extrusions for a variety of industries. Learn more about Calpex
Footage · Oceanside floor
Calpex Plastics
Calpex Plastics is a plastic extrusion company that keeps design help, die making and production under one roof. The people who quote your part are a short walk from the line that runs it.A plastic extrusion company with design, tooling and production under one roof.

FIG. 02 The extrudate leaving the die into the cooling trough on one of our lines. 
FIG. 03 Black tubing winding onto a reel.
Inside the plant · Factory tour, filmed 2021
Leading Plastic Extruded Product Manufacturer
OEMs and small businesses have come to us for extruded plastic parts since 1980. Engineering, tooling and design sit in the same building as the extrusion lines, so a single supplier carries your part from print to pallet. The three-minute tour shows those lines, the products, the materials we run and the tool and die room.
Extruded plastic parts since 1980, engineered, tooled and run in one plant. A three-minute tour, filmed in 2021.
Eight product families, each extruded to your print. Open one for its sizes, materials and options, or send a drawing for a part that fits none of them.
Eight families, each extruded to your print.
- 3D Printing FilamentsPLA · ABS · PETG
- Bundle & Protect Cables With The Best Spiral Wrap AroundØ 1/8–1 in
- Custom Plastic Extrusion ProfilesUp to 3 in wide
- Custom-Engineered Plastic Rod ExtrusionStriped or colored
- Extruded Plastic TubingOD 1/16–3 in
- PipeØ 1/8–3 in
- Urethane ExtrusionsIncl. dual-lumen tubing
- Not on the list?Most of what we make is custom.Send a drawing
Process · drawing to production, in five chapters
Plastic Extrusion Services We Provide
Design help, die making, extrusion, finishing and delivery: five steps, all handled here, from your print to packed parts.
Design, die, extrusion, finishing and delivery, from your print to packed parts.
01 / 05
Drawing.
It starts with your print.
Send your drawing
Attach your files to the RFQ. Our engineers can help with the design before the die is made.
- Accepted files
-
- STEP
- STP
- IGES
- IGS
- DWG
- DXF
- STL
- ICD
- ICS
- SLDPRT
- SLDDRW
- SLDDRT
- ZIP
- JPG
- PNG
- Per file
- 50 MB
- Design review
- Design assistance from our engineers. Every RFQ is reviewed by an engineer.

02 / 05
Die.
The die decides the part. Ours are made in-house.
In-house tool & die room
Extrusion dies are made by our own tool and die makers. Die development is in-house too.
- Tool & die
- In-house
- Die R&D
- In-house
- Die lead time
- Ask with your quote.

03 / 05
Extrusion.
Feed, melt, form, cool. One continuous part.
Capability console · published ranges
The film moves one extruded section through the families we make. The row it is showing lights up here.
- 01TubingOD 1/16–3 in
- 02Dual-lumen tubingUrethane
- 03ProfilesUp to 3 in wide
- 04T-slotted profilesUp to 3 in wide
- 05Custom profilesMade to your print
- 06RodsCo-extruded striping
Size envelope · as published
Log scale · inches
Section
FIG. 09 The same generic sections as the film, extruded at constant cross-section from the die face. Drag to turn. Illustrative, not to scale.
End views · two sections from the film
Line drawings, as they appear on a print. Your drawing sets the dimensions; we quote to it.
How it runs
- aRaw material gets a 100% quality check.
- bResin goes into the hopper. A turning screw conveys it; friction and added heat melt it.
- cA metal die shapes the melt into your cross-section. Co-extruded stripes and second materials join at the die.
- dThe part is cooled. In-process inspection.
- Raw-material checks
- 100%
- Material families
- 15+
Materials
More than 15 material families. See the materials we use

04 / 05
Finishing.
Striped at the die. Printed, cut and belled after.
Co-extrusion
Two or more materials pass through one die at the same time and leave as a single part: co-extruded stripes on tubing and rods, and dual-durometer parts.
Layer counts and material pairs: send your drawing with the materials you have in mind.
Color Custom colors matched to your sample or a Pantone or RAL reference.
After extrusion
- Co-extrusion
- Printing
- Striping
- Stamping
- Tube belling
- Coiling
- Cutting
- Tape application
- Value-added fabrication
Color Custom colors matched to your sample or a Pantone or RAL reference.
Two-color surf leash cord. Since 1986, Calpex has supplied urethane cord to surf leash manufacturers across the United States. In 1999 we developed the two-color surf leash cord, made by co-extrusion.

05 / 05
Delivery.
Packed, palletized and shipped from Oceanside.
Supply
Order once or on a blanket schedule.
General lead time incl. shipping
4–6 weeks
- Order size
- Quoted per project
- Blanket orders
- Available
Materials
Materials We Use for Plastic Extrusion
More than 15 material families run on our lines, from PVC and polyethylene to polycarbonate, nylon and Noryl®, plus urethanes for flexible parts. Tell us what the part has to do and we will help pick the resin.
Custom colors matched to your sample or a Pantone or RAL reference. Food-contact compliant resins available, with documentation supplied on request.
Who we work with · choose your path
Industries We Serve
Our custom plastic extrusions end up in vehicles, medical devices, irrigation systems, packaging, toys and surf leashes, among many other products. Engineers, distributors and makers each have a starting point below.Vehicles, medical devices, irrigation, packaging, toys and more.

Engineers & buyers
Send a print and get a quote. Design help from our engineers, dies made in-house, an ISO 9001:2015 certified quality management system. We work with OEMs and small businesses.
Quote a custom part.

Distributors
Custom extrusions made in Oceanside, California, for your line card.
Distribution inquiries.

Makers & 3D printing
3D printing filament in PLA, ABS and PETG, made in the USA. Spiral wrap from 1/8 to 1 in. Ask sales about single spools and small quantities.
Filament and spiral wrap.
Where our extrusions are used · a sample
- Automotive
- Medical devices
- Electronics
- Packaging
- Recreational vehicles
- Action sports
- Toys
- Water filtration
- Irrigation
- Building & construction
- Food handling
- 3D printing filament
- Advertising
- Aerospace
- Agriculture & farming
- Appliance commercial
- Appliance residential
- Architecture
- Auto/truck/transportation
- Automation
- Commercial
- Communications
- Computer and electronics
- Construction
- Consumer goods
- Cosmetics
- Defense industry
- Dental
- Electrical
- Food processing
- Food & beverage
- Government
- Heavy equipment
- Highway (DOT)
- Home
- Home furnishing
- Household
- HVAC
- Hydraulics
- Ice making
- Industrial
- Manufacturing
- Marine
- Material handling & processing
- Medical
- Military
- Mining
- Packaging & converting
- Plumbing
- Pneumatics
- Recreational
- Research
- Residential
- Surf
- Telecommunications
- Turf & garden
Why Choose Us
ISO 9001 certified quality management system, with published objectives.
Calpex Plastics and its employees are committed to meeting customer and legal requirements to achieve customer satisfaction. We will always strive to provide quality products on time and continually improve our Quality Management System.
Calpex Plastics and its employees are committed to meeting customer and legal requirements to achieve customer satisfaction.
- Certified
- ISO 9001:2015 quality management system, IAPMO SCB certificate 1117610.
- Checked
- 100% quality checks on incoming raw material.
- Any run
- Short runs or production runs; on-time delivery is a quality objective, set at 90% or better.
- Tooled here
- Dies designed, made and developed in our own tool and die room.
- Made to print
- Your drawing sets the section and the tolerance; our engineers can help with the design first.
- Since 1980
- Custom extrusion in one Oceanside, California plant for more than four decades.
Talk to us about your part Read our quality policy Certificate (PDF, 373 KB)
ISO 9001:2015 certificate
- Standard
- ISO 9001:2015
- Certification body
- IAPMO SCB (IAPMO Systems Certification Body), ANAB accredited
- Certificate no.
- 1117610
- Issued · expires
- ·
Full certificate details
- Certified organization
- Finova Capital Partners LLC dba Calpex Plastics
- Site
- 2570 Jason Court, Oceanside, CA 92056, USA (single site)
- Decision / re-issue
- Scope
- “Custom manufacturer of Plastic extrusions including Tubing, Pipes, Profiles, Rods, Spiral Wrap & Coils for Serving the automotive, medical, electronics, packaging, recreational vehicle, action sports, toy, water filtration, irrigation, building & construction & many other industries including 3D Printing.”
Download the certificate (PDF, 373 KB)
The certificate is shown exactly as issued by IAPMO SCB, including the entity name as printed on it.
- Raw material
- 100% quality checks on raw material
Our 5 quality objectives (targets)
Quality objectives: targets set in our quality policy, not reported results.
- Product Acceptance by CustomerObjective ≥ 95%
- On Time DeliveryObjective ≥ 90%
- Supplier QualityObjective ≥ 90%
- Supplier OTD (supplier on-time delivery)Objective ≥ 80%
- RFQ to QuoteObjective ≤ 2 weeks
Quality policy, mission, vision and values
Quality policy
Calpex Plastics and its employees are committed to meeting customer and legal requirements to achieve customer satisfaction. We will always strive to provide quality products on time and continually improve our Quality Management System.
Mission
To provide exceptional quality values and support to customers along with exceptional learning, growth and financial opportunities for Calpex Plastics employees and owners.
Vision
To be at the forefront of creating value for our customers by offering quality Parts with unmatched service.
Values
- Ethics – We always exercise our duties with honesty and integrity.
- Teamwork – We respect and support each other, without blame, to create a stronger and better performing team.
- Customer Service – We respond to every customer quickly, thoroughly, professionally and with courtesy.
As published in our quality policy.
The numbers, with sources
Every figure on this page is sourced; see Sources & definitions.
-
100%
Quality checks on raw material
Ref. 5, source -
4–6 wk
General lead time incl. shipping; quoted per project
Ref. 6, source -
Blanket orders
Available, quoted per project
Ref. 6, source -
50 MB
Per drawing: STEP, IGES, DWG, DXF, STL, IronCAD, SolidWorks, PDF, ZIP, JPG, PNG
Ref. 7, source -
ISO 9001:2015
Certified by IAPMO SCB · Cert. 1117610, expires Jan 2, 2029
Ref. 5, source -
In-house
Tool & die room; die R&D in-house
Ref. 8, source
Request a quote
Send the print. We’ll quote the part.
Attach your drawing here, or email sales@calpexplastics.com. Short runs to high volume; blanket orders available.
Attach a drawing. Blanket orders available.
What happens next
- 01We confirm receipt by email.
- 02Our engineers review your drawing and contact you with design questions.
- 03You receive a quote. Lead times are quoted per project.
- Call(760) 254-9162
- Emailsales@calpexplastics.com
- Visit2570 Jason Ct., Oceanside, CA 92056, USA
See our plant: the factory tour, 2:58
NDA on request


