ISO 9001:2015 certifiedIAPMO SCBCert. 1117610

Contact sales@calpexplastics.com (760) 254-9162

Products · Made in Oceanside, CAISO 9001:2015 · Since 1980

High-Quality Plastic Extrusion Products

Calpex Plastics makes plastic extrusion products in Oceanside, California, in eight families: tubing, pipe, profiles, rods, spiral wrap, urethane extrusions, coils and 3D printing filaments. Sizes go up to 3 in.

Most orders are custom plastic extrusions: your drawing, your material and your color. Parts can be large or miniature.

Request a quote How custom extrusion works

Ordering

As published; see Sources & definitions.

Size envelope

One 3 in maximum, every product.

Tubing runs from 1/16 to 3 in outside diameter, pipe from 1/8 to 3 in, and profiles up to 3 in wide. Spiral wrap runs from 1/8 to 1 in. Every size in between is made to your print.

Tubing OD
1/16–3 in
Pipe Ø
1/8–3 in
Profiles width
max 3 in
Rods size
max 3 in
Urethane size
max 3 in
Spiral wrap Ø
1/8–1 in
Published size ranges in inches.Ref. 2, source Profiles, rods and urethane extrusions have a published 3 in maximum; the minimum is set by your drawing, so their bars have an open left end on this log-scale chart. Coils come in a range of diameters.

Materials

Materials we extrude.

These are the resins we run on our Oceanside lines. Each name opens its material page, or its entry on the full materials list.

Custom colors matched to your sample or a Pantone or RAL reference. Food-contact compliant resins available, with documentation supplied on request.

All materials we extrude, grouped

Product families

We offer the following extrusion products to our customers:

Each family is a group of extruded plastic shapes: tubes, pipes, profiles, rods and wraps, cut, coiled or spooled as plastic extruded parts for your assembly.

  • Two cut lengths of clear polyurethane tubing, one with a red co-extruded stripe running through its wall.

    Tubing

    OD 1/16–3 in

    Round tubing from 1/16 to 3 in outside diameter, cut to length or coiled, in polyethylene (HDPE and LDPE), flexible or rigid vinyl, PETG, polyurethane, polycarbonate, polystyrene or nylon.

    Need the tube marked or identified? We can print on it, run a co-extruded stripe down its wall, or extrude dual-lumen tubing with two channels side by side.

  • Generic white round pipe with a belled end and a gray square pipe.

    Pipe

    Ø 1/8–3 in

    Round and square plastic pipe from 1/8 to 3 in, extruded in PVC, CPVC, ABS, HDPE or LDPE.

    Ends can be left plain, chamfered or belled in-house, to fit the joint shown on your drawing.

  • A generic black U-channel and a yellow T-slot track.

    Profiles

    Up to 3 in wide

    Custom profiles up to 3 in wide, such as bumpers, tracks and clips, in PVC, polypropylene, ABS or polyethylene. The shape, size and finish come from your drawing.

    Options include T-slotted, thin gauge, curved, dual durometer, flexible, frosted, conductive, flame retardant and high-temperature profiles. Food-contact compliant resins available, with documentation supplied on request.

  • Generic black, natural and white solid rods, one with a red stripe.

    Rods

    Up to 3 in

    Solid plastic rod in a choice of diameters and resins, extruded from one material or co-extruded from more than one.

    Add a co-extruded stripe for identification, or have the rod colored to match your sample or a Pantone or RAL reference.

  • A generic black spiral wrap helix.

    Spiral Wrap

    Ø 1/8–1 in

    Spiral wrap gathers wire and cable into a tidy, protected harness. Diameters run from 1/8 in for fine wiring up to 1 in for heavier harnesses.

    Specify the diameter, pitch, width and color on your drawing or in your quote request.

  • A generic amber-clear dual-lumen tube and a natural striped cord.

    Urethane Extrusions

    Rod · profile · tubing

    Urethane rod, profile and tubing, including dual-lumen tubing, co-extruded stripes and urethane coils, across a wide span of sizes.

    Choose urethane when a part has to flex, take impact and stand up to abrasion. It goes into medical, automotive and agricultural parts, and we have supplied urethane surf-leash cord since 1986.

  • A generic translucent blue retractile coil.

    Coils

    Range of diameters

    Coiled plastic parts made to your print, sized from small, light-duty coils to large, heavy-duty ones, in a range of diameters.

    Urethane coils, with other coil materials on request. Put the coil diameter, the length and the material on your drawing, and we will quote it.

  • An unlabeled graphite spool of natural 3D printing filament.

    3D Printing Filaments

    PLA · ABS · PETG

    PLA, ABS and PETG filament for 3D printers, designed and made in the USA, for first-time users and professionals.

    PLA is the everyday all-purpose choice and comes from renewable resources; PETG adds toughness and some flex; ABS suits sturdy parts that need to last.

Industries

Calpex Plastics is a leading trusted partner in custom plastics extrusions.

Partner companies in many fields build our plastic extrusion products into their own. Some of them:

Tell us what your part does and where it goes, and we will suggest a process, a material and a finish. See every industry we serve.

Next step

Send the print. We’ll quote the part.

Attach your drawing to a quote request, give us a call, or contact us with a question about any of our products.

Request a quote Call (760) 254-9162

  • ISO 9001:2015
  • Since 1980
  • Made in Oceanside, CA